Games Contact us
Select Page
Kurums Chip Industry→Chip EconomicsUpdated November 2026
Datasheet summaryKRM-CHP-0103
A leading-edge chip factory now costs more than most companies are worth. Consulting firm IBS estimates about $28 billion for a 2-nanometre fab producing 50,000 wafers a month, roughly $8 billion more than a 3-nanometre fab. Those costs flow into wafer prices: supply-chain reports put a 2-nanometre wafer from TSMC at about $30,000, against about $20,000 at 3 nanometres. Because wafer price is divided by the number of working chips, yield and chip size decide what a processor finally costs. For buyers, the consequence is structural: the most advanced chips are getting more expensive, not cheaper, with each generation.
Pin description · key takeaways
PIN 01

Fab cost rises with every generation.
IBS puts a 2-nanometre fab about $8 billion above a 3-nanometre one at the same capacity.

PIN 02

Wafer prices are reported, not published.
TSMC does not publish a price list. The widely quoted $30,000 figure comes from supply-chain reporting.

PIN 03

Cost per transistor has stopped falling.
Analysts note that it has been roughly flat since the 28-nanometre node, and one estimate shows it rising at 2 nanometres.

PIN 04

Only a few customers can afford the leading edge.
Design costs in the hundreds of millions of dollars limit early 2-nanometre adoption to companies such as Apple, AMD, Nvidia and Qualcomm.

How much does it cost to build a chip fab?

A leading-edge fabrication plant, or fab, costs in the tens of billions of dollars. Consulting firm International Business Strategies (IBS) estimates about $28 billion for a 2-nanometre fab with capacity of 50,000 wafers a month, which is about $8 billion more than an equivalent 3-nanometre fab.

Company plans are consistent with that range. Taiwanese media reported that TSMC would spend one trillion New Taiwan dollars, about $33.9 billion, on a 2-nanometre production site in Taichung. Fabs for mature processes cost far less, because they use older, depreciated tool types and need fewer process steps. That gap is why the industry has two economies: a small number of companies racing at the leading edge, and many more making established chips for cars, appliances and industrial equipment.

Why are chip fabs so expensive?

Three things drive the bill: lithography machines, the number of process steps and the building itself.

The most advanced chips are patterned with extreme-ultraviolet lithography machines that only ASML makes, each of which costs well over $100 million, and a fab needs many of them. Our ASML story explains how that monopoly arose. Each new generation also adds steps. A wafer at the leading edge passes through well over a thousand operations across several months, and every step needs tools for deposition, etching, cleaning and inspection. Finally, the cleanroom, ultra-pure water, gas and power systems of a large fab are major construction projects on their own.

A fab also loses value quickly. Equipment is typically depreciated over about five years, so a manufacturer must fill the factory immediately and keep it full. High fixed cost and fast depreciation are why foundries raise prices when demand is strong and why they are reluctant to build without committed customers.

Design noteWhen reading a factory announcement, separate the headline investment from the timeline. A figure such as $28 billion is spent over several years and across building phases, and production usually starts two to three years after ground is broken.

How much does a wafer cost at each node?

A wafer at the 2-nanometre node is reported to cost about $30,000, compared with about $20,000 at 3 nanometres. Reports describe the 2-nanometre price as roughly double that of 4- and 5-nanometre wafers.

Process nodeReported price per 300mm waferBasis
28nmAbout $3,000Analyst estimate
7nmAbout $10,000Analyst estimate
5nm and 4nmAbout $15,000Implied by reports that 2nm is double
3nmAbout $20,000Supply-chain reports
2nmAbout $30,000 or moreSupply-chain reports

TSMC does not publish wafer prices. Figures come from supply-chain reporting (Commercial Times, cited by TrendForce and others) and analyst estimates, and exclude volume discounts. Checked November 2026.

Reported price of one 300mm wafer, by process node~$3,00028nm~$10,0007nm~$15,0005/4nm~$20,0003nm~$30,0002nmSupply-chain and analyst estimates. TSMC does not publish wafer prices. kurums.com
Reported wafer prices rise steeply at each new process node.

Prices are still moving. Reports from late 2025 said TSMC planned price increases in each of four consecutive years beginning in 2026, with research firms projecting rises of between 3% and 10% depending on customer volume. Meanwhile capacity is expanding: the Commercial Times, cited by TrendForce, reported that 2-nanometre output at TSMC's Kaohsiung and Baoshan sites was expected to climb toward 100,000 wafers a month by the end of 2026.

Advertisement

How does a wafer price become a chip price?

Divide the wafer price by the number of good chips on the wafer. The formula is simple, and its two variables, chip size and yield, explain most of the difference between a cheap chip and an expensive one.

Cost per good chip = wafer price ÷ (chips per wafer × yield)

A smartphone processor is small enough that one wafer holds roughly 300 to 400 of them. At $30,000 a wafer and 350 chips, the raw silicon cost is about $86 per chip before any are rejected. If 80% of chips work, the cost per good chip rises to about $107. Packaging, testing, design cost recovery and margin are added on top. That is how a processor made on a $30,000 wafer can cost a phone maker far more than $100: reports citing analysts put Apple's first 2-nanometre processor at about $280 per unit.

Large chips suffer more. A data-centre processor can be several times the area of a phone chip, and the largest are close to ten times, so far fewer fit on a wafer, and a single defect is more likely to land on each one. This arithmetic is the reason artificial intelligence accelerators are so expensive, and the reason manufacturers increasingly split large designs into smaller pieces that are joined in the package.

Is Moore's Law still reducing costs?

Not in the way it used to. For decades, each new process made transistors both smaller and cheaper. Analysts now observe that cost per transistor has been roughly flat since the 28-nanometre node.

One published estimate goes further. It calculates that the cost per billion transistors rises from about $0.97 at 3 nanometres to about $1.18 at 2 nanometres, because wafer prices increased about 50% while transistor density improved by only 15% to 23%. Estimates differ, but the direction is widely accepted: new nodes still deliver better performance and lower power consumption, and they no longer deliver cheaper transistors. Companies move to them because they need the performance, not because it saves money.

What does it cost to design a chip?

Design cost rises even faster than manufacturing cost. IBS estimates the cost of designing a chip at about $51 million at 28 nanometres, $298 million at 7 nanometres and $542 million at 5 nanometres.

Those figures include engineering salaries, software, intellectual-property licences, verification and the masks used to print the design. They explain why the list of early customers for each new node is short. Reports name Apple, AMD, Nvidia, Qualcomm and Broadcom among the companies ordering 2-nanometre capacity. Our comparison of the best EDA software for chip design explains the software part of that budget, and the guide to how the semiconductor value chain works shows where design sits among the other stages.

Caution · absolute maximum ratingsA chip startup that plans its first product on the newest node is betting hundreds of millions of dollars before first revenue. Most successful first chips use a process that is one or more generations old.
Advertisement

What is happening to prices for mature chips?

Mature-process chips are cheaper to make and are not immune to price pressure. In its September 2026 foundry report, TrendForce said the industry was concerned that mature-process capacity would remain tight and that wafer prices would rise.

The reason is indirect. When factories and suppliers concentrate investment on advanced logic and memory for artificial intelligence, capacity for ordinary power chips, microcontrollers and display drivers grows slowly. Chinese foundries have expanded mature capacity aggressively, as our story on China's mature-node chip strategy explains, but trade restrictions limit how freely some buyers can use it. For a company that buys industrial or automotive electronics, mature-node pricing matters more than the 2-nanometre headline.

Where are the new fabs being built?

Mostly in Taiwan, the United States, South Korea, Japan and China. TSMC's first 2-nanometre production sites are in Taiwan. According to TechNews, roughly 30% of TSMC's capacity for 2-nanometre and more advanced nodes is eventually expected to come from its Arizona fabs.

Building outside Asia costs more and takes longer, which is why governments subsidise it. The story of TSMC's overseas fabs covers the company's sites in the United States, Japan and Germany. Fab construction is rising to meet artificial intelligence demand, and each of those factories will need the equipment and skilled staff that are already in short supply.

What do rising chip costs mean for businesses?

Three practical consequences follow. First, premium devices will keep getting more expensive at each generation, because the processor inside them does. Hardware refresh budgets should assume rising unit prices for high-end phones, laptops and servers. Second, companies should choose the oldest process that meets their needs when specifying custom or semi-custom chips. Third, anyone evaluating artificial intelligence infrastructure should recognise that accelerator prices reflect real manufacturing costs as well as margin, so they are unlikely to fall quickly.

Finance teams modelling these costs can pair this guide with our analysis of semiconductor market size in 2026, and with the note on Nvidia's AI chip price increases for the effect on enterprise budgets.

How can a small company afford to make a chip?

By avoiding the leading edge and sharing costs. Multi-project wafer services, often called shuttles, place designs from many customers on one wafer, so each pays for a fraction of the masks and silicon. On mature processes that brings a prototype run within reach of a funded startup or a university group.

Three other routes reduce risk further. A field-programmable gate array can prove a design in hardware before any chip is manufactured. Design-service companies take a specification through to production for clients without a full in-house team. And open process design kits for older nodes allow a complete design to be built with free tools. The common rule is to buy only as much process technology as the product needs: most successful first chips use a node that is several years old.

Frequently asked questions

How much does a 2nm wafer cost?

About $30,000, according to supply-chain reports. TSMC does not publish prices, and large customers negotiate their own terms.

How much does it cost to build a semiconductor fab?

IBS estimates about $28 billion for a 2-nanometre fab producing 50,000 wafers a month. Fabs for mature processes cost much less.

How many chips come from one wafer?

It depends on chip size. A 300mm wafer yields roughly 300 to 400 smartphone processors, and far fewer large data-centre chips.

Why are advanced chips getting more expensive?

Fab and design costs rise with every generation, wafer prices have increased by about 50% from 3nm to 2nm, and transistor density is improving more slowly than price.

Last updated: November 2026 · Reviewed by the Kurums Technology editorial team. General information, not investment, legal or engineering advice.

Discover more from Kurums | Business Intelligence

Subscribe to get the latest posts sent to your email.

Discover more from Kurums | Business Intelligence

Subscribe now to keep reading and get access to the full archive.

Continue reading